Construction

• Polycarbonate enclosure
• Low profile compact design – only 1.8” thick allows for installation in many applications
• Remote Charge/Power “ON” LED illuminated push to test switch button for mandated code compliance test provides manual verification of the transfer circuit and LED fixtures

Optics/LEDs

• Works with or without an AC driver to convert new or existing LED fixtures into emergency lighting
• Provides constant current output to the load during emergency mode operation
• Designed to operate NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD fixtures
• 7W to 21W systems with 12-48VDC output voltage
• 145mA - 875mA Programmable output current

Installation

• Suitable for internal installation in an LED fixture

Electrical

• Universal 120-277VAC, 50/60Hz input
• Long-life, maintenance-free NiMH battery
• Provides a minimum of 90 minutes of emergency operating time within operating temperatures. 24-hour maximum battery recharge time as per UL 924
• Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault
• Input overcurrent protection: Fusible link

Testing & Compliance

• cULus Listed for Damp Locations
• Meets UL 924 requirements
• CEC Title 20 compliant
• Suitable for field installation
• Class 2 compliant output classification
• Operating temperatures: 0°C to 50°C (32°F to 122°F)