Construction

• Die-formed steel housing in a white finish
• LED Panels adjust to 0°, 15°, and 30°
• Polycarbonate lens with a general 90° distribution, optional aisle lens distribution (60° x 90°), or optional wide lens distribution (110° x 110°)
• Easy lens replacement with toolless snap-on end caps
• Optional uplight modules provide 15% of fixture's wattage in uplight and install easily on top of enclosure with no wiring required
• Isolated central driver compartment optimizes thermal dissipation
• Built in 3.5mm AUX receptacle on the front cover for easy plug and play sensor installation
• ½” Knockout on both ends as well as in the central panel

Optics/LEDs

• Standard general 90°distribution, optional aisle lens distribution (60° x 90°), or optional wide lens distribution (110° x 110°)
• Optional uplight modules provide 15% of fixture wattage in uplight
• All configurations are power and CCT switchable, switch located on top of enclosure
• Lumen packages from 12,000 to 60,000 lumens
• Color switchable between 3000K, 3500K, 4000K and 5000K CCT
• Efficacy up to 170lm/w
• CRI ≥80
• L70 > 50,000hrs

Installation

• Toolless installation of uplight modules and aisle lens kits and wide angle lens kits
• 10’ Adjustable cable mount kit included for suspension mount
• ½” Knockouts located at both ends of the unit
• AUX sensor receptacle built in the central front panel
• Can be surface or stem/pendant with the use of the surface/ pendant mount kits
• Easily set wattage and CCT during installation using the adjustment switches located outside the housing

Electrical

• 120-277VAC, 50/60Hz
• Power Factor > 0.90
• 0-10V Dimming driver
• Built-in drive surge protection

Options

• Factory installed battery backup: 25W, delivers up to 4,250 lumens, 60W, delivers up to 10,200 lumens (ULHB-260 & ULHB-340) for 90 minutes of emergency powered illumination, mounted to top of unit. Rated for temperatures of 0°C to 45°C (32°F to 113°F)
• See accessories for plug and play sensors – fixture is provided with a receptacle to accept AUX based sensors

Accessories

• Plug and Play Occupancy Sensors – receptacle built on the central front panel
• Dimming occupancy sensor, PIR, with daylight harvesting capabilities, 3.5mm AUX port (TL-MSP12)
• Litelogic Wireless Bluetooth PIR Sensor with daylight harvesting capabilities, 120/277VAC, 3.5mm AUX port (LE-MS3-AUX-HB1)
• Remote for TL-MSP12 occupancy sensor (TL-MSSW-REMOTE)
• Surface/pendant mounts allow for surface or conduit mount installation (ULHB-110/180-SPM, ULHB-260/340-SPM)
• Aisle Lens Kit with 60° x 90° beam angle (ULHB-110-AL, ULHB-180-AL, ULHB-260/340-AL)
• Wide Angle Lens Kit with 110° x 110° beam angle (ULHB-110-WL, ULHB-180-WL, ULHB-260/340-WL)
• Uplight Module (ULHB-XXX-UM)

Testing & Compliance

• cULus Listed for Damp Locations
• DesignLights Consortium® (DLC) PREMIUM Qualified (consult QPL for qualified models)
• Meets state of California Title 24 requirements for dimming and control of light fixtures
• Operating temperatures: -20°C to 45°C (-4°F to 113°F) or 0°C to 45°C (32°F to 113°F) with battery backup

Warranty

• Five Year Warranty (Terms and Conditions Apply)