Construction

• Sleek ABS housing designed for easy installation in grid ceilings
• 3W UVA LED located inside air intake to activate titanium dioxide photocatalytic oxidation (ozone free)
• UV-stabilized polycarbonate optical lens
• Four (4) intake ports with four-stage HEPA filtration system, removes up to 99% of airborne contaminants (<0.3 pm) including virus and bacteria
• Integral centrifugal industrial fan rated for 202 CFM (12,120 CADR - Clean Air Delivery Rate) circulates air through filters with little noticeable sound (<40dB)
• Four (4) exhaust ports for clean, purified air, one unit is ideal for 100-165ft² space

Optics/LEDs

• Efficacies up to 114 LPW maximize energy savings and utility rebates
• 35W LEDs produce 4000 lumens, edgelit panel
• 4000K CCT
• L70 over 100,000 hours
• CRI ≥82

Installation

• Unit simply lifts through grid ceiling and rests on T-bars – must be secured to ceiling
• Unit is equipped with internal switch and remote control to independently operate the air return system and light (remote can operate up to 25 fixtures)
• Easy installation in new construction or retrofit, standard recessed mounting in most 2’ x 2’ grid ceilings, 9/16” and 15/16” grids
• One unit is ideal for 100-165 square foot space

Electrical

• Class 2 power supply, 120-277VAC, 50/60Hz
• Power: 50W (35W LED, 3W UVA LED (inside air intake), 12W fan)
• 0-10V Dimming
• Total Harmonic Distortion (THD) of less than 20%
• Power supply with high-power factor of 95% typical
• Fan rated for 70,000 hours
• Noise >40db

Accessories

• Replacement four-stage HEPA Filter (complete set - four pieces for one fixture)

Testing & Compliance

• cUL Listed for Damp Locations
• EPA Registration (In Process)
• Operating temperature: -20°C to 40°C (-4°F to 104°F)
• FDA tested for antiviral, antibacterial and organic gas decomposition nanometer compound filter
• SGS tested for antiseptic material and air circulation (Specification GB21551 & Specification QB/T2591-2003)
• SGS tested for formaldehyde decomposition (Specification GB18801)

Filtration

• Four-stage HEPA filtration system removes up to 99%* of airborne contaminants (<0.3 pm) and pathogens including virus and bacteria
• This system uses photocatalytic oxidation purification; the enclosure and filters are embedded with titanium dioxide that when exposed to UVA light (located in the filtration chamber) reacts with airborne contaminants and pathogens to oxidize them, undergoing a chemical reaction transforming them into non-toxic substances. Titanium dioxide photocatalytic oxidation purification has been proven over the years to be an effective method to purify and disinfect water and air against virus, bacteria, TVOC (total concentration of volatile organic compounds) and a multitude of other waterborn contaminants to less than >0.3 microns at 99% efficiency
• This system also uses a silver nanocoating on the complete enclosure, lens and filters; the silver ions go through a catalytic reaction with hydrogen sulfide ion in bacteria and inhibit its reproduction, creating superoxide free radicals and breaking down the bacteria
• This air-circulation/return system has gone through rigorous testing in 3rd party labs and effectively neutralizes up to 99% virus such as H1N1, enterovirus and other mixed respiratory viruses after 20 minutes of operation
• This system has also been tested against a multitude of common bacteria and other airborne contaminants such as formaldehyde, common microbes and drastically reduces TVOC when operational over 24 hours
• Easily replaceable filters are rated for five years or 2,100 hours (whichever comes first); a built-in indicator light illuminates when filters need replacing

Warranty

• Five Year Warranty (Terms and Conditions Apply)