Construction

• Sleek die-cast aluminum housing in a bronze finish standard with 7” arm mount and round pole adapter
• UV-stabilized polycarbonate optical lens
• Integral heat sink fins maximize heat dissipation
• Hinged driver access for ease of maintenance
• Standard with 7" straight arm for square pole or round pole (with round pole adaptor). Wall mount adapter is also available
• Slotted bolt pattern suitable for retrofit to most existing drill hole patterns
• Includes a 12" whip (5 conductors provided for convenience, dimming leads not connected)

Optics/LEDs

• Designed with minimal uplight to eliminate light pollution
• 70 to 300 Watts replace up to 750 Watts HID for up to 70% energy savings
• Efficacies up to 139 LPW maximize energy savings and utility rebates
• Type III, IV and V distributions optimize light distribution
• Available in 3000K, 4000K and 5000K CCT
• L70 of 130,000 hours
• CRI ≥70

Installation

• Standard with pole mount arm (7”) suitable for 4” or 5” square poles. Includes round pole adaptor. Arm features access door for easy wiring on site and includes knockouts for motion and photocontrol sensors
• Hinged driver door with captive hardware for ease of access
• Additional easy mount accessories such as slipfitter, trunnion, swivel and wall bracket

Electrical

• Class 2 power supply, 120-277VAC, 50/60Hz
• 1-10V Dimming driver for models 150W+ (120-277VAC only), dimming leads require connection in field
• Power supply with high-power factor of 90% typical
• 347/480VAC Dedicated driver option for 70W, 150W, 200W and 300W
• Standard 10kVA surge protection for models ≥150W

Options

• Bluetooth enabled dimming cccupancy sensor (Option: LE), PIR, 120/277VAC (integral)
• Dimming Occupancy Sensor, PIR, 120/277VAC (Integral)
• 120-277VAC Twist Lock receptacle installed on arm (Twist Lock photocontrol included)

Accessories

• Multiple accessories such as sensors and photocontrols
• Twist Lock universal photocontrol (120-277VAC) for dusk to dawn lighting control
• Button photocontrol (120-277VAC) for 70W and 100W models
• Dimming sensor for additional energy savings
• Multiple mounts for project flexibility including pole mounts, slipfitter, trunnion, swivel and wall mounts

Testing & Compliance

• Tested to meet IP66 requirements
• Operating temperature: -40°C to 45°C (-40°F to 113°F)
• International Dark Sky friendly approved product (with a fixed downlight mount, 3000K only).
• cULus Listed for Wet Locations
• DesignLights Consortium® (DLC) PREMIUM Qualified (consult QPL for qualified models)
• International Dark Sky friendly approved product. (IDA) 3000K only (compliant only with a fixed downlight mount)

Warranty

• Five Year Warranty (Terms and Conditions Apply)
• 10 Year Warranty available upon request, consult factory