The Exitronix LBDX Series LED Backup Driver is specifically designed to provide emergency lighting of LED fixtures with the loss of power. The unit’s low-profile configuration makes the series suitable for most pre-installation and on-site applications requiring emergency illumination.
MESA Series Single Phase, Indoor Standby Emergency Lighting Inverter
The Mesa Series is a single phase, standby, solid-state inverter system designed to provide “soft-start” power to designated emergency lighting fixtures. Each system consists of a self-contained inverter section with a fully automatic, thermal-compensating, variable-rate battery charger. The Mesa series is designed to function in conjunction with the existing building electrical system to provide Pulse Width Modulated (PWM), sinusoidal, high-quality power conditioning, backup power protection and distribution for lighting loads and other critical loads. Upon failure of the normal utility power, the Mesa Series automatically transfers to inverter mode and provides a minimum of 90 minutes of emergency power to the connected load. Lumen output will be maintained at 100% of the lamp’s rating throughout the duration.
The XEB-75-CF-LM Series compact, fluorescent emergency ballast allows the same fixture to be used for both normal and emergency operation when used in conjunction with an AC ballast.
LEMD-G3 Series Emergency LED Driver with Guardian G3
The Exitronix LEMD Series emergency LED driver is specifically designed to provide emergency lighting of LED fixtures with the loss of power. The unit’s available configurations makes the series suitable for most pre-installation and on-site applications requiring emergency illumination. The GUARDIAN G3 remote monitoring and reporting system from Exitronix simplifies code compliance and significantly reduces operating and maintenance costs by offering automated testing, remote monitoring and reporting of emergency fixture status from a centralized location.