Construction

• Die cast aluminum housing with heat-dissipating fins in a white powder coat finish
• Sealed design for use in Wet Locations (without BB or HVS options)
• 3/4” Hook and security cable included
• 6’ whip (3 conductor + 6’ whip for 0-10V dimming wires)

Optics/LEDs

• UV-stabilized polycarbonate lens - IK08 impact tested
• Diffused 120° distribution
• Optional aluminum reflector available
• Multiple lumen packages: each configuration is power switchable (4 levels)
• Switchable between three color temperatures: 3000K, 4000K and 5000K CCT. Switch located and easily accessible outside enclosure
• Efficacy up to 180 lumens per watt
• CRI ≥70
• L70 > 100,000hrs
• L90 > 44,000hrs

Installation

• 3/” NPT threaded hook included
• Can be conduit pendant (3/4”) mounted (conduit supplied by other)
• Optional yoke mount bracket for surface mount installation
• Integral battery backup – field or factory installed
• 480V Step-Down Transformer Box- field or factory installed.
• Includes 6’ whip/cord standard (0-10V dedicated whip)
• Easily set wattage and CCT during installation using the adjustment switches located outside the housing.

Electrical

• Class 2 power supply, Universal 120-277VAC, 50/60Hz
• Power Factor > 0.90
• 0-10V Dimming driver (dedicated 0-10V leads, 6’ whip)
• Built in drive surge protection L/N-PE: 6kV, L-N: KV
• Power Factor > 0.90

Options

• Factory-installed battery backup (120-277VAC): Option BB - 15W, delivers 2,000 lumens (100W and 150W units) Option BB2 - 25W, delivers 3,500 lumens (230W units) Both options provide over 90 min. of emergency powered illumination
• Factory installed step down transformer
• See accessories for plug and play sensors – fixture is provided with a receptacle to accept AUX based sensors

Accessories

• Plug and Play Occupancy Sensors – receptacle built in center of the lens
• Wireless Bluetooth PIR Sensor with daylight harvesting capabilities, 12V, 3.5mm AUX port (LE-MS3-AUX-HB1)
• Bluetooth enabled wall switches
• Dimming occupancy sensor, PIR, with daylight harvesting capabilities. 12V, 3.5mm AUX port (TL-MSP12)
• External battery backup (120/277VAC) accessories blends in seamlessly with the design of the round highbay. Rated for ambient temperatures of 10°C to 40°C (50°F to 104°F)
• 15W (for 100W & 150W configurations) delivers 2,000 lumens for over 90 minutes of emergency powered illumination (RSHL-BB-15W-WH)
• 25W (for 230W configuration) delivers 3,500 lumens for over 90 minutes of emergency powered illumination (RSHL-BB-25W-WH)
• 480V Step-down transformer box (RSHL-480V-A-WH, RSHL-480V-B-WH)
• Junction Box – can be used to make wiring connections (RSHL-JB-WH)
• Remote for TL-MSP12 occupancy sensor (TL-MSSW-REMOTE)
• Yoke mount bracket for surface mount applications in a white finish (RSHL-YK-WH)
• 16” Aluminum Reflector (RSHL-ALR-A, RSHL-ALR-B)
• 16” Polycarbonate Refractor & Bottom Polycarbonate Lens (RSHL-PCR, RSHL-RCDL)
• Multiple line cords (indoor rated) for field installation (LC6T, LC15, LC15T)
• Field-installed In-line 10kVA surge protector for 120/277VAC, 320V, 420J (20300032)

Testing & Compliance

• cULus Listed for Wet Locations (Damp location listed with Battery Backup, Step-down transformer and sensor options/accessories)
• Tested to meet IP65 (Without options/accessories listed above)
• IK08 Rated lens
• DesignLights Consortium® (DLC) PREMIUM Qualified (Consult QPL for qualified models)
• Meets state of California Title 24 requirements for dimming and control of light fixtures
• Operating temperatures: -20°C to 50°C (-4°F to 122°F)

Warranty

• Five Year warranty (terms and conditions apply)