Inactive
pic1
large view image
Inactive


XEB-42-CF Series Compact Fluorescent Emergency Ballast

The XEB-42-CF is a UL Listed fluorescent emergency ballast that allows the same fixture to be used for both normal and emergency operation. In the event of a power failure, the XEB-42-CF switches to the emergency mode and operates one or two of the existing lamps for 90 minutes. The unit contains a battery, charger, and inverter circuit in a single can. The XEB-42-CF has a total initial output of up to 750 lumens for one or two lamps. The XEB-42-CF utilizes AC output to ensure compatibility with new lamp technologies and features lamp selector leads for optimizing light output for designated lamp types. The XEB-42-CF provides flex for wiring to the fixture or ballast compartment and a single piece test switch and charge indicator for installation in a standard switch box for mounting adjacent to the fixture.

cULus Compliant Damp Locations Warranty
DISCONTINUED

Features & Benefits

  • UL Damp Location Listed for factory or field installation
  • Suitable for use in plenum spaces or enclosed and gasket luminaires
  • For use with switched or non-switched fixtures
  • Will cold start and operate all specified lamps
  • Compatible with ECO/low mercury lamps
  • 90 minute emergency run time, 24 hour recharge time
  • High temperature, maintenance-free, NiCad battery
  • Includes test switch and charge indicator accessory kit
  • All leads enclosed in flex conduit
  • Time delay enhancement for compatibility with end of life circuitry
  • Galvanized steel case
XEB-42-CF Series Compact Fluorescent Emergency Ballast

XEB-42-CF Series Compact Fluorescent Emergency Ballast

IES Files



Contact us or your sales rep if you need a part number that isn't listed here.


Enter your zip code to find a representative in your area.


exitronix trace lite specialty led growlite
Inactive


Compact Fluorescent Emergency Ballast

The XEB-42-CF is a UL Listed fluorescent emergency ballast that allows the same fixture to be used for both normal and emergency operation. In the event of a power failure, the XEB-42-CF switches to the emergency mode and operates one or two of the existing lamps for 90 minutes. The unit contains a battery, charger, and inverter circuit in a single can. The XEB-42-CF has a total initial output of up to 750 lumens for one or two lamps. The XEB-42-CF utilizes AC output to ensure compatibility with new lamp technologies and features lamp selector leads for optimizing light output for designated lamp types. The XEB-42-CF provides flex for wiring to the fixture or ballast compartment and a single piece test switch and charge indicator for installation in a standard switch box for mounting adjacent to the fixture.

cULus Compliant Damp Locations Warranty
DISCONTINUED

Need more information?

We are happy to answer any questions you have about the XEB-42-CF Series Compact Fluorescent Emergency Ballast.

Spec Sheet Request More Info

Configure your XEB-42-CF Series Compact Fluorescent Emergency Ballast

Part Number

Features & Benefits

  • UL Damp Location Listed for factory or field installation
  • Suitable for use in plenum spaces or enclosed and gasket luminaires
  • For use with switched or non-switched fixtures
  • Will cold start and operate all specified lamps
  • Compatible with ECO/low mercury lamps
  • 90 minute emergency run time, 24 hour recharge time
  • High temperature, maintenance-free, NiCad battery
  • Includes test switch and charge indicator accessory kit
  • All leads enclosed in flex conduit
  • Time delay enhancement for compatibility with end of life circuitry
  • Galvanized steel case
XEB-42-CF Series Compact Fluorescent Emergency Ballast

Enter your zip code to find a representative in your area.


We Have More ItemsYou may also like