AXL2 80-280W Series LED Flood Luminaire

While Supplies Last

While Supplies Last

AXL2 80-280W Series LED Flood Luminaire

The AXL2 Series of architectural LED flood/area luminaires are designed to illuminate parking areas, pathways, building facades, loading docks and a wide variety of other large, general site lighting applications. A variety of mounting options make the AXL2 (80W-280W) a versatile flood light with efficacies up to 131 LPW to maximize energy savings and utility rebates.

AXL2 80-280W Series LED Flood Luminaire is AVAILABLE WHILE SUPPLIES LAST

Try these alternatives:

Need more information?

We are happy to answer any questions you have about the AXL2 80-280W Series LED Flood Luminaire.

Spec Sheet Request More Info

Features & Benefits

Die-cast aluminum housing with stainless steel hardware and powder coat bronze finish for durability
Integral heat sink fins maximize heat dissipation
Wireway enclosure is sealed with a watertight silicone gasket
Multiple mounts available – must be ordered separately
UV Stabilized polycarbonate optical lenses in IES distributions Type II, III, IV, V (7H x 7V) and NEMA distributions: VN (3H x 3V), MN (4H x 4V) and MW (5H x 5V)
Efficacies up to 131 LPW maximize energy savings and utility rebates
80-280 Watts replace up to 750W HID for up to 70% energy savings
Available in 4000K and 5000K CCT
L70 of 100,000 hours
CRI ≥ 80
Class 2 power supply, 120 to 277VAC, 50/60Hz
0-10V Dimming driver, 2 leads from fixture: (1) 3 conductor wire for power and (1) 2 wires for dimming
Power supply with high power factor of 90% typical
Total harmonic distortion <20%
Standard 10kVA surge protection
Easy installation in new construction or retrofit applications
DesignLights Consortium® (DLC) qualified
Multiple mounts available: adjustable arm, slip-fitter, trunnion and yoke – ordered separately
Bulllhorn and wall mount accessories available
Mounting Accessories: Adjustable pole mount arm (AXL2-80/280-A), Slip-fitter mount (AXL2-80/280-SF), Trunnion mouint (AXL2-80/280-T), Yoke mount (AXL2-80/140-YK)
Shield Accessories: Full glare shield (AXL2-xx-FGS), Half glare shield (AXL2-xx-HGS), Wire guard (AXL2-xx-WG)
Additional Accessories: Twist-lock receptacle kit (AXL2-TLPCKIT), 120-277VAC External pencil photocontrol (PCE1), Double 180° bullhorn mount (AXL2-80/280-BD), Wall mount bracket (AXL2-80/280-W), Wall mount bracket, 90° (AXL2-80/280-W90)

AXL2-80-280 Spec Sheet

AXL2-80-280 Install Instructions

Accessories

AXL2-240-280-FGS

Full Glare Shield, AXL2, 240W & 280W

AXL2-240-280-HGS

Half Glare Shield, AXL2, 240W & 280W

AXL2-240-280-WG

Wire Guard, AXL2, 240W & 280W

AXL2-80-140-FGS

Full Glare Shield, AXL2, 80W, 100W & 140W

AXL2-80-140-HGS

Half Glare Shield, AXL2, 80W, 100W & 140W

AXL2-80-140-WG

Wire Guard, AXL2, 80W, 100W & 140W

AXL2-TLPCKIT

Twist-lock Receptacle Kit

PCE1

120/277VAC External Pencil Photocontrol

Mounting

AXL2-240/280-YK

AXL2, 240-280W, Yoke Mount

AXL2-80/140-YK

AXL2, 80-140W, Yoke Mount

AXL2-80/280-A

AXL2, 80-280W, Adjustable Arm Mount

AXL2-80/280-BD

Double 180° Bullhorn Mount

Slip-fitter Mounts

AXL2-80/280-SF

AXL2, 80-280W, Slip-fitter Mount

Trunnion Mounts

AXL2-80/280-TR

AXL2, 80-280W, Trunnion Mount

Wall Mounts

AXL2-80/280-W90

Wall Mount Bracket, 90°

WM-T-S-BR

Wall Mount Straight Tenon, Bronze Finish

Contact us or your sales rep if you need a part number that isn't listed here.

AXL2-80-5-4K-BR

AXL2-100-5-4K-BR

AXL2-140-3-5K-BR

AXL2-140-5-4K-BR

AXL2-240-3-5K-BR

AXL2-280-3-4K-BR

AXL2-280-5-4K-BR

Enter your zip code to find a representative in your area.

While Supplies Last

AXL2 80-280W LED Flood Luminaire

AXL2 80-280W Series LED Flood Luminaire is AVAILABLE WHILE SUPPLIES LAST

Try these alternatives:

Need more information?

We are happy to answer any questions you have about the AXL2 80-280W Series LED Flood Luminaire.

Spec Sheet Request More Info

Configure your AXL2 80-280W Series LED Flood Luminaire

Model

Wattage/Size

Distribution

CCT

Finish

Configure your AXL2 80-280W Series LED Flood Luminaire

Model

Wattage/Size

Distribution

CCT

Finish

Features

Features & Benefits

Die-cast aluminum housing with stainless steel hardware and powder coat bronze finish for durability
Integral heat sink fins maximize heat dissipation
Wireway enclosure is sealed with a watertight silicone gasket
Multiple mounts available – must be ordered separately
UV Stabilized polycarbonate optical lenses in IES distributions Type II, III, IV, V (7H x 7V) and NEMA distributions: VN (3H x 3V), MN (4H x 4V) and MW (5H x 5V)
Efficacies up to 131 LPW maximize energy savings and utility rebates
80-280 Watts replace up to 750W HID for up to 70% energy savings
Available in 4000K and 5000K CCT
L70 of 100,000 hours
CRI ≥ 80
Class 2 power supply, 120 to 277VAC, 50/60Hz
0-10V Dimming driver, 2 leads from fixture: (1) 3 conductor wire for power and (1) 2 wires for dimming
Power supply with high power factor of 90% typical
Total harmonic distortion <20%
Standard 10kVA surge protection
Easy installation in new construction or retrofit applications
DesignLights Consortium® (DLC) qualified
Multiple mounts available: adjustable arm, slip-fitter, trunnion and yoke – ordered separately
Bulllhorn and wall mount accessories available
Mounting Accessories: Adjustable pole mount arm (AXL2-80/280-A), Slip-fitter mount (AXL2-80/280-SF), Trunnion mouint (AXL2-80/280-T), Yoke mount (AXL2-80/140-YK)
Shield Accessories: Full glare shield (AXL2-xx-FGS), Half glare shield (AXL2-xx-HGS), Wire guard (AXL2-xx-WG)
Additional Accessories: Twist-lock receptacle kit (AXL2-TLPCKIT), 120-277VAC External pencil photocontrol (PCE1), Double 180° bullhorn mount (AXL2-80/280-BD), Wall mount bracket (AXL2-80/280-W), Wall mount bracket, 90° (AXL2-80/280-W90)