LPX-CP Series Color and Power Switchable LED Flat Panel


Equity Line

Equity Line
LPX-CP Series Color and Power Switchable LED Flat Panel is from our Equity Line of products.

More Equity Line Products

Equity Line

The LPX-CP Series backlit LED panels offer superior performance in an adjustable, energy-efficient low-profile design. It is available in 1' x 4', 2' x 2' and 2' x 4' configurations and provides flexibility while minimizing inventory by simply adjusting both CCT and wattage. The CCT can easily be switched between 3500K, 4000K and 5000K. The wattage can be adjusted between 20W-30W-40W for the 1' x 4' and 2' x 2' configurations and 30W-40W-50W for the 2' x 4'configuration. This series is ideal for office spaces, schools, hospitals, and any indoor location that requires even illumination and lower maintenance. The LPX-CP Series is compatible with most standard T-bar grid ceilings, includes 0-10V dimming standard and features PMMA optical lensing that will not yellow over time. DesignLights Consortium® (DLC) Qualified for energy rebates. All panels are packaged in a quantity of four.

UL Certified DLC Qualified Damp Locations IC Rated Warranty


Configure your LPX-CP Series Color and Power Switchable LED Flat Panel

Model

Accessories
This item has available accessories! See the accessories tab below or consult spec sheet for more information.


Need more information?


We are happy to answer any questions you have about the LPX-CP Series Color and Power Switchable LED Flat Panel.

Request More Info
  • Cold rolled carbon steel enclosure in a white finish
  • Aluminum frame with seamless corners
  • Recessed design fits most standard T-bar grid ceilings, only 1.4” thickness
  • Backlit design, LEDs sit at the back of the enclosure aimed directly at the diffuser to evenly illuminate the entire surface of the panel
  • Sturdy frame prevents warping due to the slightly more elevated profile
  • Switchable from 3500K, 4000K and 5000K CCT
  • CRI ≥80
  • Efficacy up to 120lm/w
  • L70 > 50,000hrs
  • UV-stabilized PMMA optical lenses over the LEDs that will not yellow over time
  • Unit simply lifts through grid ceiling and rests on T-bars
  • Easy installation in new construction or retrofit
  • Standard recessed mounting in most 1'x4', 2’x2’ or 2’x4’ grid ceilings
  • Earthquake clips included
  • Universal 120-277VAC, 50/60Hz
  • Power Factor > 0.90
  • 0-10V Dimming driver
  • UL Listed for Damp Locations (IC rated)
  • IP20 Rated
  • DesignLights Consortium® (DLC) Qualified
  • Operating temperatures: -10°C to 40°C (14°F to 40°C)
  • Five Year Warranty (Terms and Conditions Apply)

LPX-CP Series Color and Power Switchable LED Flat Panel

IES Files


Accessories

MC6-6
18/6 X 6', MC - Metal Clad Modular Assembly Quick Cable Whip

Accessory - Mounting

LPX-14-SMK
1'x4' LED Flat Panel Surface Mount Kit
LPX-22-SMK
2'x2' LED Flat Panel Surface Mount Kit
LPX-24-SMK
2'x4' LED Flat Panel Surface Mount Kit
LPX-CMK
Y-Cable Mounting Kit (2 Pcs) for LED Flat Panels
LP14-FMK
1' X 4' Flange Mounting Kit
LP22-FMK
2' X 2' Flange Mounting Kit
LP24-FMK
2' X 4' Flange Mounting Kit

Emergency Battery Pack

LBD-10-NC-CW-C
LED 10.7W, NiCad, Constant Power Emergency Battery Pack
LBD-13-NC-CW-C
LED 13.7W, NiCad, Constant Power Emergency Battery Pack
LBD-17-NC-CW-C
LED 17.8W, NiCad, Constant Power Emergency Battery Pack
LBD-5-NC-CW-C
LED 5W, NiCad, Constant Power Emergency Battery Pack
LBD-7-NC-CW-C
LED 7.8W, NiCad, Constant Power Emergency Battery Pack
Contact us or your sales rep if you need a part number that isn't listed here.

LPX-14-CP
LPX-22-CP
LPX-24-CP

Features

  • Cold rolled carbon steel enclosure in a white finish
  • Aluminum frame with seamless corners
  • Recessed design fits most standard T-bar grid ceilings, only 1.4” thickness
  • Backlit design, LEDs sit at the back of the enclosure aimed directly at the diffuser to evenly illuminate the entire surface of the panel
  • Sturdy frame prevents warping due to the slightly more elevated profile
  • Switchable from 3500K, 4000K and 5000K CCT
  • CRI ≥80
  • Efficacy up to 120lm/w
  • L70 > 50,000hrs
  • UV-stabilized PMMA optical lenses over the LEDs that will not yellow over time
  • Unit simply lifts through grid ceiling and rests on T-bars
  • Easy installation in new construction or retrofit
  • Standard recessed mounting in most 1'x4', 2’x2’ or 2’x4’ grid ceilings
  • Earthquake clips included
  • Universal 120-277VAC, 50/60Hz
  • Power Factor > 0.90
  • 0-10V Dimming driver
  • UL Listed for Damp Locations (IC rated)
  • IP20 Rated
  • DesignLights Consortium® (DLC) Qualified
  • Operating temperatures: -10°C to 40°C (14°F to 40°C)
  • Five Year Warranty (Terms and Conditions Apply)

Accessories

MC6-6
18/6 X 6', MC - Metal Clad Modular Assembly Quick Cable Whip

Accessory - Mounting

LPX-14-SMK
1'x4' LED Flat Panel Surface Mount Kit
LPX-22-SMK
2'x2' LED Flat Panel Surface Mount Kit
LPX-24-SMK
2'x4' LED Flat Panel Surface Mount Kit
LPX-CMK
Y-Cable Mounting Kit (2 Pcs) for LED Flat Panels
LP14-FMK
1' X 4' Flange Mounting Kit
LP22-FMK
2' X 2' Flange Mounting Kit
LP24-FMK
2' X 4' Flange Mounting Kit

Emergency Battery Pack

LBD-10-NC-CW-C
LED 10.7W, NiCad, Constant Power Emergency Battery Pack
LBD-13-NC-CW-C
LED 13.7W, NiCad, Constant Power Emergency Battery Pack
LBD-17-NC-CW-C
LED 17.8W, NiCad, Constant Power Emergency Battery Pack
LBD-5-NC-CW-C
LED 5W, NiCad, Constant Power Emergency Battery Pack
LBD-7-NC-CW-C
LED 7.8W, NiCad, Constant Power Emergency Battery Pack

Contact us or your sales rep if you need a part number that isn't listed here.

LPX-14-CP
LPX-22-CP
LPX-24-CP

Enter your zip code to find a representative in your area.


We Have More ItemsYou may also like