EQHB Series High-Performance LED Linear Highbay

Features

• Die-formed steel housing in a white finish
• Standard diffused polycarbonate lens
• Compact configurations, as small as 9.9” wide and 23.6” long
• Low profile, only 1.8” height for models up to 29,000 lumens
• Isolated central driver compartment optimizes thermal dissipation (access from below the fixture-remove two screws)
• ½” Knockout on both ends as well as in the central panel to allow for easy installation of sensors or other accessories
• Multiple lumen packages from 12,000 to 50,500 lumens to accommodate a variety of job applications
• Efficacies up to 142 LPW maximize energy savings and utility rebates
• Available in 4000K and 5000K CCT
• CRI ≥80
• L70 >100,000 hours
• L90> 50,000 hours
• Central compartment easily accessible from the front to allow for easy wiring or accessory installation
• ½” Knockouts located at both ends of the unit as well as the central front panel
• Can be stem/pendant mounted with the use of the stem mount kit
• 347/480VAC Option
• Class 2 power supply, 120 to 277VAC, 50/60Hz
• 1-10V Dimming driver (120-277 VAC only)
• Built-in driver surge protection L/N-PE: 6kV, L-N: 4kV
• Integral battery backup option offers 1000 lumens (90W and 130W configuration) and 2000 lumens (180W - 370W configuration) of emergency powered illumination for 90 minutes
• Integral microwave sensor option (SC). Sensor allows for two or three step/level dimming and has optional daylight harvesting capabilities. Settings can be adjusted optional remote control accessory. See sensor details for default sensor settings
• 6’ and 15’ Line cords (LC*, 3-conductor)
• 15' Metal clad line cord (MC15, 3-conductor)
• Dimming occupancy sensor (TL-MSSW)
• On/off occupancy sensor (TL OCCSNS-120/277)
• Remote for SC option and TL-MSSW occupancy sensors (TL-MSSWREMOTE)
• Stem/conduit mount box allows for surface mount installation, consult ordering information for surface mount kit needed based on highbay configuration
• Multiple line cords for field installation
• Wireguard kit for field installation
• Field-installed In-line 10kVA surge protector for 120/277VAC, 320V, 420J (20300032)
• Field-installed In-line 10kVA surge protector for 347/480VAC, 1500V, 570J (20300033)
• cULus Listed for Damp Locations
• DesignLights Consortium® (DLC) PREMIUM Qualified
• Operating temperatures: -40°C to 55°C (-40°F to 131°F)
• Five Year Warranty (Terms and Conditions Apply)

Enter your zip code to find a representative in your area.