DDXS Series

Surface Mount LED Downlight with PIR Sensor

DDXS Series Surface Mount LED Downlight with PIR Sensor

Equity Line


New
Equity Line
DDXS Series Surface Mount LED Downlight with PIR Sensor is from our Equity Line of products.

More Equity Line Products

New


DDXS Series Surface Mount LED Downlight with PIR Sensor

The DDXS Series is a 120V, surface mount, LED dome downlight that provides project flexibility with field-selectable color temperature (2700K, 3000K, 3500K, 4000K, and 5000K CCT) and built in motion sensor. The DDXS is 6” and offers1,250 lumens, and the twist-lock diffuser and included hardware allow for easy installation directly to a junction box. The DDXS can also seamlessly retrofit 4” to 6” cans with optional torsion clips and E26 medium screw-base Edison connector. This fixture is Energy Star certified and California Title 24 JA8-2019 compliant. This low-profile, attractive surface mount downlight is ideally suited for residential, retail, light commercial, closets, and other interior spaces that utilize a traditional downlight or surface mount product.

ETL Compliant California Title 24 - JA8 DLC Premium cULus Listed for Wet Locations Warranty

Construction

  • Stamped steel construction in a white finish
  • Twist-lock polycarbonate diffused lens produces soft uniform illumination and can easily be removed for products easy installation
  • Low profile construction – only 0.95”

Optics/LEDs

  • 6” 15W unit, up to 1250 lumens
  • 110° beam angle
  • CCT Selectable between 5 CCTs; 2700K, 3000K, 3500K, 4000K & 5000K CCT
  • L70 > 100,000 hours
  • CRI ≥90

Installation

  • Easily mounts to 4” junction box with included hardware
  • Twist off lens and install directly to intended surface
  • CCT and sensor switches easily accessible under the lens
  • Optional mounting accessories available for retrofit applications - 6” Kit includes torsion clips and medium E26 Edison base

Electrical

  • 120VAC, 60Hz Input
  • CCT and sensor switches located under the lens
  • TRIAC & ELV Dimming down to 10%
  • Power factor > 0.90
  • Integral PIR sensor - Switchable between 30 sec/1 min/ 5 min hold time, detects motion from 15’ when mounted at 10’

Testing & Compliance

  • cETLus Listed for Wet Locations
  • Energy Star certified
  • Certified to the high efficacy requirements of California Title 24 JA8 2016-2022
  • Operating temperature: -20°C to 40°C (-4°F to 104°F)
DDXS Series Surface Mount LED Downlight with PIR Sensor

Accessory - Mounting

DDX-TRK-6
6" Retrofit Kit, (2) Torsion Mounting Clips, (1) E26 Base

Contact us or your sales rep if you need a part number that isn't listed here.

DDXS-D6-15-C5

Energy Rebates

Qualified products may be eligible for utility rebates.


Enter your zip code to find a representative in your area.


exitronix trace lite specialty led growlite
Equity Line


New


Surface Mount LED Downlight with PIR Sensor

The DDXS Series is a 120V, surface mount, LED dome downlight that provides project flexibility with field-selectable color temperature (2700K, 3000K, 3500K, 4000K, and 5000K CCT) and built in motion sensor. The DDXS is 6” and offers1,250 lumens, and the twist-lock diffuser and included hardware allow for easy installation directly to a junction box. The DDXS can also seamlessly retrofit 4” to 6” cans with optional torsion clips and E26 medium screw-base Edison connector. This fixture is Energy Star certified and California Title 24 JA8-2019 compliant. This low-profile, attractive surface mount downlight is ideally suited for residential, retail, light commercial, closets, and other interior spaces that utilize a traditional downlight or surface mount product.

ETL Compliant California Title 24 - JA8 DLC Premium cULus Listed for Wet Locations Warranty

Need more information?

We are happy to answer any questions you have about the DDXS Series Surface Mount LED Downlight with PIR Sensor.

Spec Sheet Request More Info Rebate Finder

Configure your DDXS Series Surface Mount LED Downlight with PIR Sensor

Model

Configure your DDXS Series Surface Mount LED Downlight with PIR Sensor

Model

Construction

  • Stamped steel construction in a white finish
  • Twist-lock polycarbonate diffused lens produces soft uniform illumination and can easily be removed for products easy installation
  • Low profile construction – only 0.95”

Optics/LEDs

  • 6” 15W unit, up to 1250 lumens
  • 110° beam angle
  • CCT Selectable between 5 CCTs; 2700K, 3000K, 3500K, 4000K & 5000K CCT
  • L70 > 100,000 hours
  • CRI ≥90

Installation

  • Easily mounts to 4” junction box with included hardware
  • Twist off lens and install directly to intended surface
  • CCT and sensor switches easily accessible under the lens
  • Optional mounting accessories available for retrofit applications - 6” Kit includes torsion clips and medium E26 Edison base

Electrical

  • 120VAC, 60Hz Input
  • CCT and sensor switches located under the lens
  • TRIAC & ELV Dimming down to 10%
  • Power factor > 0.90
  • Integral PIR sensor - Switchable between 30 sec/1 min/ 5 min hold time, detects motion from 15’ when mounted at 10’

Testing & Compliance

  • cETLus Listed for Wet Locations
  • Energy Star certified
  • Certified to the high efficacy requirements of California Title 24 JA8 2016-2022
  • Operating temperature: -20°C to 40°C (-4°F to 104°F)
DDXS Series Surface Mount LED Downlight with PIR Sensor
DDX-TRK-6
6" Retrofit Kit, (2) Torsion Mounting Clips, (1) E26 Base


Contact us or your sales rep if you need a part number that isn't listed here.

DDXS-D6-15-C5

Enter your zip code to find a representative in your area.


We Have More ItemsYou may also like