Construction

• Die-formed steel housing in a white finish
• Polycarbonate lens offered in both a standard wide (120°) and optional Aisle lens distribution (40°x110°)
• Mini configuration, as small as 10.2” wide and 16.5” long
• Built in receptacle on the front panel for easy plug and play sensor installation
• ½” knockout on both ends as well as in the central panel

Optics/LEDs

• Standard wide (120°) and optional Aisle lens distribution (40°x110°)
• Multiple lumen packages from 13,800 to 60,000 lumens
• Available in 4000K or 5000K CCT
• Two configurations are CCT (4000K/5000K) & power switchable (3 levels): 135W (15,000lm, 18,500lm, 20,250lm) or 200W (23,250lm, 27,750lm, 30,000lm)
• Switch located and easily accessible outside enclosure (on switchable configurations) maximizes energy savings and utility rebates
• Efficacy up to 150lm/w
• CRI ≥80
• L70 > 100,000hrs
• L90 > 40,000hrs

Installation

• 10’ Adjustable cable mount kit included for suspension mount
• ½” Knockouts located at both ends of the unit, AUX sensor receptacle built in the central front panel
• Can be surface or stem/pendant with the use of the stem or surface mount kits
• Easily set wattage and CCT during installation using the adjustment switches located outside the housing. (on selectable configurations)

Electrical

• Class 2 power supply, Universal 120-277VAC, 50/60Hz
• Power Factor > 0.90
• 0-10V Dimming driver
• 480V Step-Down Option
• Built-in drive surge protection L-N: 4kV, L/N-GND: 6kV

Options

• Factory installed battery backup 15W (delivers 2,000 lumens (Option: BB1) and a 24W system delivers 3,500 lumens for over 90 minutes of emergency powered illumination (Option: BB2), mounted to top of unit)
• Factory installed 480V step down transformer (HVS)
• 6’ and 15’ Line cords (LC*, 3-conductor) for 120-277VAC applications
• See accessories for plug and play sensors – fixture is provided with a receptacle to accept AUX based sensors

Accessories

• Plug and Play Occupancy Sensors – receptacle built on the central front panel: Dimming occupancy sensor, PIR, with daylight harvesting capabilities. 120/277VAC, 3.5mm AUX port (TL-MSP12); Litelogic Wireless Bluetooth PIR Sensor with daylight harvesting capabilities, 3.5mm AUX port (LE-MS3-AUX)
• Remote for TL-MSP12 occupancy sensor (TL-MSSW-REMOTE)
• Stem or conduit mounts allows for surface or conduit mount installation
• Wireguard kit for field installation
• Multiple line cords (indoor rated) for field installation (LC6, LC15)
• Field-installed In-line 10kVA surge protector for 120/277VAC, 320V, 420J (20300032)
• Field-installed In-line 10kVA surge protector for 480VAC, 1500V, 570J (20300033)

Testing & Compliance

• cULus Listed for Damp Locations
• DesignLights Consortium® (DLC) PREMIUM Qualified (consult QPL for qualified models)
• Meets state of California Title 24 requirements for dimming and control of light fixtures
• Operating temperatures: -20°C to 50°C (-4°F to 122°F) (When fixture is a minimum of 18” from the ceiling)

Warranty

• Five Year Warranty (Terms and Conditions Apply)