- UV-stabilized polycarbonate enclosure in a light gray finish, IK08 impact-tested, 4’ and 8’ length
- The fixture is designed with a high-quality polycarbonate lens featuring a unique poured-in gasket to provide superior water and dust ingress protection
- Stainless steel clips secure the lens to the enclosure
- Toolless access to the driver compartment
- UV-stabilized frosted polycarbonate lens offering an even, diffused light
- General 120° distribution
- Available in two lengths/lumen packages;
• 4’ Unit, 40W, 5200 lumens
• 8’ Unit, 80W, 10,400 lumens - Significant energy savings compared to traditional light sources, up to 130 LPW
- Color switchable between 3500K, 4000K and 5000K CCT. Switch is located inside the fixture
- L70 >100,000 hours
- CRI ≥80
- Class 2 power supply, 120 to 277VAC, 50/60Hz
- 0-10V Dimming driver
- For ceiling or wall surface mount installation, includes mounting clips
- Knockouts provided on the back and both ends of the enclosure for flexibility in mounting
- Toolless access to driver compartment - unit opens up directly to the driver compartment and safety cables retain the lens in place for ease of installation and wiring
- Switches are located inside the unit to avoid any tampering and to maintain weatherproofing
- Not suitable for installation in T-bar ceilings without field mounting modifications (determined by installer)
- cULus Listed for Wet Locations
- Tested to meet IP65 requirements
- Operating temperatures: -40°C to 40°C (-40°F to 104°F)
- DesignLights Consortium® (DLC) Qualified
- Five Year Warranty (Terms and Conditions Apply)
- Integral battery backup option (BB) offers 875 lumens and over 90 minutes of emergency illumination for path of egress. Rated for ambient temperatures of 0°C to 40°C (32°F to 104°F)
- Integral microwave sensor option (SC) behind the lens. Sensor allows for two or three step/level dimming and has optional daylight harvesting capabilities. Settings can be adjusted via dipswitches on the sensor or optional remote control accessory. See sensor details for default sensor settings.
- Optional remote control for sensor (TL-MSSW-REMOTE) allows field programming of sensor settings. See sensor detail section for default settings
Contact us or your sales rep if you need a SKU that isn't listed here.
VPA-4-40-C
VPA-4-40-C-BB
VPA-4-40-C-BB-SC
VPA-4-40-C-SC
VPA-8-80-C
VPA-8-80-C-BB
VPA-8-80-C-BB-SC
VPA-8-80-C-SC
