Construction

• Durable 4-3/8” width, 22-gauge steel enclosure in a white powder coated finish, IK08 impact tested, 2’ and 4’ length
• Vandal-resistant Torx hardware
• Flanged housing ends secure the lens in place
• Several knockouts across the bottom of the housing and the two ends
• All visible hardware in a white finish to match enclosure

Optics/LEDs

• UV-stabilized frosted polycarbonate lens offering an even, diffused light
• Units provide a range of lumen packages by simply selecting the wattage desired for your application;
• 2’ unit - wattage selectable from 10W through 30W offering up to 3850 lumens
• 4’ unit - wattage selectable from 12W through 40W offering up to 5320 lumens
• Switches are located inside fixture
• Significant energy savings compared to traditional light sources with up to 130 LPW
• Color switchable between 3000K, 3500K and 4000K CCT. Switch is located inside the fixture.
• L70 >100,000 hours
• CRI ≥80

Installation

• For ceiling or wall surface mount installation
• Several knockouts behind the enclosure and on both ends for flexibility in mounting
• Remove one end cap to slide and snap out the lens for easy access to inside the fixture
• Clips inside the fixture provide simple access for wiring and installation as well as access to the CCT and power selectable switches
• Not suitable for installation in T-bar ceilings without field mounting modifications to be determined by installer

Electrical

• Class 2 power supply, 120 to 277VAC, 50/60Hz
• 0-10V dimming driver, 1-100% flicker-free dimming
• 12V auxiliary output from the driver
• 4KV driver protection
• All units are provided with an integral microwave sensor, centered behind the lens. Sensor allows for 2 or 3 step - level dimming and has optional daylight harvesting capabilities. Settings can be adjusted via optional remote control accessory. See sensor details for default sensor settings.
• Sensor can easily be disabled for on/off fixture operation

Options

• Integral battery Backup (BB option) offers 875 lumens and over 90 minutes of emergency powered illumination for path of egress. Rated for ambient temperatures of 0°C to 40°C (32°F to 104°F)

Accessories

• Remote control for sensor (TL-RC-SCNS) allows field programming of sensor settings. Default sensor settings provided in sensor detail section (this accessory is not required if default settings are acceptable)

Testing & Compliance

• cETLus Listed for Damp Locations
• DesignLights Consortium® (DLC) PREMIUM Qualified in the stairwell and linear ambient category (consult QPL for qualified models)
• Operating temperatures: -20°C to 40°C (-40°F to 104°F)

Warranty

• Five Year Warranty (Terms and Conditions Apply)