SLS Series Color and Power Switchable LED Linkable Strip Lights

Features

• Steel housing in a white finish
• Toolless direct access to the driver compartment by pressing on the two buttons on each end
• Available in three lengths, several different lumen packages:
  • 2’ Unit, 20W, 2600 lumens
  • 4’ Unit, 40W, 5200 lumens
  • 4’ Unit, Power Switchable (30W-40W-50W), 3900-5200-6500 lumens
  • 8’ Unit, 64W, 8320 lumens
• Two knockouts on both ends and several beneath the unit for ease of installation
• Polycarbonate lens and end caps that provide uniform illumination along the entire length of the luminaire with no visible LED pixilation
• General 120° distribution
• Efficacies up to 130 LPW maximizes energy savings and utility rebates
• CCT switchable (3500K, 4000K and 5000K)
• 4’ Unit offered in power switchable configuration (30W-40W-50W) offering up to 6500 lumens
• CRI of >80
• L70 >100,0000 hours
• L90 rated at 54,000 hours
• Toolless direct access to the driver compartment by pressing on the two buttons on each end
• Suspension or surface mount installation (suspension kit sold separately)
• Continuous row mounting (linkable adapter required) linkable up to 140’
• Several knockouts along the enclosure for flexibility in mounting
• Not suitable for installation in T-bar ceiling without field mounting modifications to be determined by installer
• 100-277VAC, 50/60Hz
• 1-10V Dimming driver
• Integral battery backup (BB) provides 1400 lumens and 90 minutes of emergency run time for path of egress (4’ and 8’ models only). Rated for ambient temperatures of 0°C to 40°C (32°F to 104°F)
• Multi-level dimming sensor with daylight harvesting capability available for additional energy savings (SC) and can be controlled via DIP switches or remote control (sold separately) Not available for SLS-4-40-C configuration
• Cable suspension mount kit (EHB-CTY10, SLS-4-CMK & SLS-8-CMK)
• Linkable adapter bracket allows units to be linked end to end for continuous rows with seamless illumination (for both surface and flush mount configurations)
• Max units linkable:
  • SLS-2-20, 27 pcs @120VAC, 60 pcs @ 277VAC
  • SLS-4-40, 13 pcs @120VAC, 30 pcs @277VAC
  • SLS-4-50, 10 pcs @ 120VAC, 24 pcs @ 277VAC
  • SLS-8-64, 8 pcs @120VAC, 18 pcs @ 277VAC
• Remote control for sensor allows for field programming (TL-HA-REMOTE)
• DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
• cULus Listed for Damp Locations
• IK08 Rated
• Operating temperatures: -20°C to 40°C (-4°F to 104°F)
• Five Year Warranty (Terms and Conditions Apply)

Enter your zip code to find a representative in your area.