pic1 pic2 pic3
large view image


400C Die-cast Series

The 400C Series aluminum LED exit/emergency combo unit combines an appealing design, the latest in die-cast technology, and high-performance electronics to ensure reliability.

IK08 Rated for Impact Protection IC Rated CEC Compliant Warranty

Features & Benefits

  • Unique design, LED die-cast combo provides a specification grade, low-profile exit sign with LED emergency lights using only 3 Watts per lamp
  • Each lamp head is protected by a polycarbonate shield
  • Ceiling, wall or end mount
  • UL Listed 90 minute emergency run time, 24 hour recharge time
  • Standard finishes: black, white or brushed aluminum
  • California Energy Commission (CEC) compliant
CONSTRUCTION
The Exitronix 400C is constructed of rugged die-cast aluminum body with soft corners (designed for traditional mounting as well as conduit entry and pendant mounting). Clear finish on brushed face prevents fingerprints or other surface impurities. Field selectable chevron knockouts are concealed and easily removed. All units are supplied with mounting canopy for back, ceiling or end mounting.
ILLUMINATION
Illumination is accomplished utilizing high-intensity, long-life LEDs exceeding UL 924 requirements for brightness and uniformity, while maximizing energy efficiency.
ELECTRICAL

Input Dual-voltage input 120 or 277VAC @ 60Hz.

Nickel Cadmium Battery - NiCad Exitronix nickel cadmium batteries are maintenance-free with a life expectancy of 15 years. Nickel cadmium batteries offer high discharge rates and continue to perform in a vast temperature range from 32°F - 104°F (0°C - 40°C).

Solid-State Transfer The circuit features solid-state switching for emergency lamps, eliminating concerns of damaged contact or mechanical failures associated with relays. The switching circuit detects a loss of line voltage and automatically switches to emergency mode.

Brownout Circuit Brownout circuit monitors the line voltage, as the line voltage sags and can no longer illuminate the exit sign to meet UL 924 visibility test, the emergency circuit will turn on to supply a portion or all the power to illuminate the sign for a minimum of 90mins until the line voltage is restored.

Test Button The test button is easy to locate and provides manual verification of the transfer circuit and emergency lamps.

INSTALLATION
Installs in minutes with easy-to-read instructions and detailed diagrams. No special hardware or tools necessary. Internally housed components and battery eliminate the risk of damage during installation. Mounting canopy included.
CONFORMANCE TO CODES & STANDARDS
The 400C Series is UL listed and meets or exceeds the following: UL 924, NEC requirements and NFPA 101.

400C Die-cast Series

IES Files


Accessories

VEPA
VEX/ILX Canopy Adapter

Pendant Kits

ER1-KIT-BA
1 Foot Pendant Kit-Brushed Aluminum
ER1-KIT-BL
1 Foot Pendant Kit-Black
ER1-KIT-WH
1 Foot Pendant Kit-White
ER2-KIT-BA
2 Foot Pendant Kit-Brushed Aluminum
ER2-KIT-BL
2 Foot Pendant Kit-Black
ER2-KIT-WH
2 Foot Pendant Kit-White

Vandal Resistant Polycarbonate Guards

XG-6
Back Mount - 18.25" X 14" X 6.5"

Vandal Resistant Wire Guards

WG-S
Back Mount - 16.0" X 14.0" X 7"

Contact us or your sales rep if you need a part number that isn't listed here.

400C-1-BA
400C-1-BB
400C-1-BL
400C-1-WW
400C-2-BA
400C-2-BB
400C-2-BL
400C-2-WW
G400C-1-BA
G400C-1-BB
G400C-1-BL
G400C-1-WW
G400C-2-BA
G400C-2-BL
G400C-2-WW

Enter your zip code to find a representative in your area.


exitronix trace lite specialty led growlite


Die Cast Exit Sign with Emergency Lighting

The 400C Series aluminum LED exit/emergency combo unit combines an appealing design, the latest in die-cast technology, and high-performance electronics to ensure reliability.

IK08 Rated for Impact Protection IC Rated CEC Compliant Warranty

Need more information?

We are happy to answer any questions you have about the 400C Die-cast Series.

Spec Sheet Request More Info

Configure your 400C Die-cast Series

Series
Face
Finish

Configure your 400C Die-cast Series

Series
Face
Finish

Features & Benefits

  • Unique design, LED die-cast combo provides a specification grade, low-profile exit sign with LED emergency lights using only 3 Watts per lamp
  • Each lamp head is protected by a polycarbonate shield
  • Ceiling, wall or end mount
  • UL Listed 90 minute emergency run time, 24 hour recharge time
  • Standard finishes: black, white or brushed aluminum
  • California Energy Commission (CEC) compliant
CONSTRUCTION
The Exitronix 400C is constructed of rugged die-cast aluminum body with soft corners (designed for traditional mounting as well as conduit entry and pendant mounting). Clear finish on brushed face prevents fingerprints or other surface impurities. Field selectable chevron knockouts are concealed and easily removed. All units are supplied with mounting canopy for back, ceiling or end mounting.
ILLUMINATION
Illumination is accomplished utilizing high-intensity, long-life LEDs exceeding UL 924 requirements for brightness and uniformity, while maximizing energy efficiency.
ELECTRICAL

Input Dual-voltage input 120 or 277VAC @ 60Hz.

Nickel Cadmium Battery - NiCad Exitronix nickel cadmium batteries are maintenance-free with a life expectancy of 15 years. Nickel cadmium batteries offer high discharge rates and continue to perform in a vast temperature range from 32°F - 104°F (0°C - 40°C).

Solid-State Transfer The circuit features solid-state switching for emergency lamps, eliminating concerns of damaged contact or mechanical failures associated with relays. The switching circuit detects a loss of line voltage and automatically switches to emergency mode.

Brownout Circuit Brownout circuit monitors the line voltage, as the line voltage sags and can no longer illuminate the exit sign to meet UL 924 visibility test, the emergency circuit will turn on to supply a portion or all the power to illuminate the sign for a minimum of 90mins until the line voltage is restored.

Test Button The test button is easy to locate and provides manual verification of the transfer circuit and emergency lamps.

INSTALLATION
Installs in minutes with easy-to-read instructions and detailed diagrams. No special hardware or tools necessary. Internally housed components and battery eliminate the risk of damage during installation. Mounting canopy included.
CONFORMANCE TO CODES & STANDARDS
The 400C Series is UL listed and meets or exceeds the following: UL 924, NEC requirements and NFPA 101.
400C Die-cast Series

Accessories

VEPA
VEX/ILX Canopy Adapter

Pendant Kits

ER1-KIT-BA
1 Foot Pendant Kit-Brushed Aluminum

ER1-KIT-BL
1 Foot Pendant Kit-Black

ER1-KIT-WH
1 Foot Pendant Kit-White

ER2-KIT-BA
2 Foot Pendant Kit-Brushed Aluminum

ER2-KIT-BL
2 Foot Pendant Kit-Black

ER2-KIT-WH
2 Foot Pendant Kit-White

Vandal Resistant Polycarbonate Guards

XG-6
Back Mount - 18.25" X 14" X 6.5"

Vandal Resistant Wire Guards

WG-S
Back Mount - 16.0" X 14.0" X 7"


Contact us or your sales rep if you need a part number that isn't listed here.

400C-1-BA
400C-1-BB
400C-1-BL
400C-1-WW
400C-2-BA
400C-2-BB
400C-2-BL
400C-2-WW
G400C-1-BA
G400C-1-BB
G400C-1-BL
G400C-1-WW
G400C-2-BA
G400C-2-BL
G400C-2-WW

Enter your zip code to find a representative in your area.


We Have More ItemsYou may also like