SSF Series

LED Linear Stairwell Fixture

SSF Series LED Linear Stairwell Fixture


SSF Series LED Linear Stairwell Fixture

The SSF LED Linear Stairwell Series features a sleek yet robust construction with an IK08 impact-tested steel housing, vandal-proof hardware and UV-stabilized polycarbonate lens. The SSF Series is offered in both 2' and 4' configurations and comes standard with an integral microwave sensor centered behind the lens providing 2 or 3 step - level dimming as well as optional daylight harvesting capability. Internal switches allow the user to select the CCT (3000K-3500K-4000K) and the power output (between 10W to 40W, depending on fixture size), providing maximum project flexibility. The SSF is offered with a battery backup option providing 90 minutes of emergency egress lighting. The SSF is a DesignLights Consortium® PREMIUM qualified product in the stairwell and linear ambient category, maximizing energy-savings and utility rebates. Designed for stairwell applications, the SSF can be used in a wide variety of other indoor, general ambient lighting applications including schools, hospitals and stores and is the perfect choice for both new construction and retrofits.

ETL Compliant DLC Premium Damp Locations IK08 Rated for Impact Protection Warranty

Construction

  • Durable 4-3/8” width, 22-gauge steel enclosure in a white powder coated finish, IK08 impact tested, 2’ and 4’ length
  • Vandal-resistant Torx hardware
  • Flanged housing ends secure the lens in place
  • Several knockouts across the bottom of the housing and the two ends
  • All visible hardware in a white finish to match enclosure

Optics/LEDs

  • UV-stabilized frosted polycarbonate lens offering an even, diffused light
  • Units provide a range of lumen packages by simply selecting the wattage desired for your application;
  • 2’ unit - wattage selectable from 10W through 30W offering up to 3850 lumens
  • 4’ unit - wattage selectable from 12W through 40W offering up to 5320 lumens
  • Switches are located inside fixture
  • Significant energy savings compared to traditional light sources with up to 130 LPW
  • Color switchable between 3000K, 3500K and 4000K CCT. Switch is located inside the fixture.
  • L70 >100,000 hours
  • CRI ≥80

Installation

  • For ceiling or wall surface mount installation
  • Several knockouts behind the enclosure and on both ends for flexibility in mounting
  • Remove one end cap to slide and snap out the lens for easy access to inside the fixture
  • Clips inside the fixture provide simple access for wiring and installation as well as access to the CCT and power selectable switches
  • Not suitable for installation in T-bar ceilings without field mounting modifications to be determined by installer

Electrical

  • Class 2 power supply, 120 to 277VAC, 50/60Hz
  • 0-10V dimming driver, 1-100% flicker-free dimming
  • 12V auxiliary output from the driver
  • 4KV driver protection
  • All units are provided with an integral microwave sensor, centered behind the lens. Sensor allows for 2 or 3 step - level dimming and has optional daylight harvesting capabilities. Settings can be adjusted via optional remote control accessory. See sensor details for default sensor settings.
  • Sensor can easily be disabled for on/off fixture operation

Options

  • Integral battery Backup (BB option) offers 875 lumens and over 90 minutes of emergency powered illumination for path of egress. Rated for ambient temperatures of 0°C to 40°C (32°F to 104°F)

Accessories

  • Remote control for sensor (TL-RC-SCNS) allows field programming of sensor settings. Default sensor settings provided in sensor detail section (this accessory is not required if default settings are acceptable)

Testing & Compliance

  • cETLus Listed for Damp Locations
  • DesignLights Consortium® (DLC) PREMIUM Qualified in the stairwell and linear ambient category (consult QPL for qualified models)
  • Operating temperatures: -20°C to 40°C (-40°F to 104°F)

Warranty

  • Five Year Warranty (Terms and Conditions Apply)

Accessories

TL-RC-SCNS
Remote Control Required for Sensor Field Programming
TRHT-T20-PIN
2in, T20-Torx Pin In Security, 1/4" Drive Bit Hex Shaft for Standard Drills

Contact us or your sales rep if you need a part number that isn't listed here.

SSF-2-CP-BB-SC
SSF-2-CP-SC
SSF-4-CP-BB-SC
SSF-4-CP-SC

Energy Rebates

Qualified products may be eligible for utility rebates.


Enter your zip code to find a representative in your area.


exitronix trace lite specialty led growlite


LED Linear Stairwell Fixture

The SSF LED Linear Stairwell Series features a sleek yet robust construction with an IK08 impact-tested steel housing, vandal-proof hardware and UV-stabilized polycarbonate lens. The SSF Series is offered in both 2' and 4' configurations and comes standard with an integral microwave sensor centered behind the lens providing 2 or 3 step - level dimming as well as optional daylight harvesting capability. Internal switches allow the user to select the CCT (3000K-3500K-4000K) and the power output (between 10W to 40W, depending on fixture size), providing maximum project flexibility. The SSF is offered with a battery backup option providing 90 minutes of emergency egress lighting. The SSF is a DesignLights Consortium® PREMIUM qualified product in the stairwell and linear ambient category, maximizing energy-savings and utility rebates. Designed for stairwell applications, the SSF can be used in a wide variety of other indoor, general ambient lighting applications including schools, hospitals and stores and is the perfect choice for both new construction and retrofits.

ETL Compliant DLC Premium Damp Locations IK08 Rated for Impact Protection Warranty

Need more information?

We are happy to answer any questions you have about the SSF Series LED Linear Stairwell Fixture.

Spec Sheet Request More Info Rebate Finder

Configure your SSF Series LED Linear Stairwell Fixture

Part Number

Configure your SSF Series LED Linear Stairwell Fixture

Part Number

Construction

  • Durable 4-3/8” width, 22-gauge steel enclosure in a white powder coated finish, IK08 impact tested, 2’ and 4’ length
  • Vandal-resistant Torx hardware
  • Flanged housing ends secure the lens in place
  • Several knockouts across the bottom of the housing and the two ends
  • All visible hardware in a white finish to match enclosure

Optics/LEDs

  • UV-stabilized frosted polycarbonate lens offering an even, diffused light
  • Units provide a range of lumen packages by simply selecting the wattage desired for your application;
  • 2’ unit - wattage selectable from 10W through 30W offering up to 3850 lumens
  • 4’ unit - wattage selectable from 12W through 40W offering up to 5320 lumens
  • Switches are located inside fixture
  • Significant energy savings compared to traditional light sources with up to 130 LPW
  • Color switchable between 3000K, 3500K and 4000K CCT. Switch is located inside the fixture.
  • L70 >100,000 hours
  • CRI ≥80

Installation

  • For ceiling or wall surface mount installation
  • Several knockouts behind the enclosure and on both ends for flexibility in mounting
  • Remove one end cap to slide and snap out the lens for easy access to inside the fixture
  • Clips inside the fixture provide simple access for wiring and installation as well as access to the CCT and power selectable switches
  • Not suitable for installation in T-bar ceilings without field mounting modifications to be determined by installer

Electrical

  • Class 2 power supply, 120 to 277VAC, 50/60Hz
  • 0-10V dimming driver, 1-100% flicker-free dimming
  • 12V auxiliary output from the driver
  • 4KV driver protection
  • All units are provided with an integral microwave sensor, centered behind the lens. Sensor allows for 2 or 3 step - level dimming and has optional daylight harvesting capabilities. Settings can be adjusted via optional remote control accessory. See sensor details for default sensor settings.
  • Sensor can easily be disabled for on/off fixture operation

Options

  • Integral battery Backup (BB option) offers 875 lumens and over 90 minutes of emergency powered illumination for path of egress. Rated for ambient temperatures of 0°C to 40°C (32°F to 104°F)

Accessories

  • Remote control for sensor (TL-RC-SCNS) allows field programming of sensor settings. Default sensor settings provided in sensor detail section (this accessory is not required if default settings are acceptable)

Testing & Compliance

  • cETLus Listed for Damp Locations
  • DesignLights Consortium® (DLC) PREMIUM Qualified in the stairwell and linear ambient category (consult QPL for qualified models)
  • Operating temperatures: -20°C to 40°C (-40°F to 104°F)

Warranty

  • Five Year Warranty (Terms and Conditions Apply)
TL-RC-SCNS
Remote Control Required for Sensor Field Programming

TRHT-T20-PIN
2in, T20-Torx Pin In Security, 1/4" Drive Bit Hex Shaft for Standard Drills


Contact us or your sales rep if you need a part number that isn't listed here.

SSF-2-CP-BB-SC
SSF-2-CP-SC
SSF-4-CP-BB-SC
SSF-4-CP-SC

Enter your zip code to find a representative in your area.


We Have More ItemsYou may also like