RS2 Series

27W LED Steel Emergency Lighting Unit

RS2 Series 27W LED Steel Emergency Lighting Unit

Equity Line

Equity Line
RS2 Series 27W LED Steel Emergency Lighting Unit is from our Equity Line of products.

More Equity Line Products


RS2 Series 27W LED Steel Emergency Lighting Unit

The Exitronix RS2 Series combines LED performance and dependability with a rugged 20 gauge steel enclosure. The corrosion-resistant, economical emergency unit features fully-adjustable LED lamp heads and easy installation.

cULus Listed Damp Locations New York City Approved Warranty



Features & Benefits

  • High impact, injection molded, thermoplastic LED lamp heads
  • 1.5W (12 LEDs x .125 watt) per lamp head
  • Enclosure constructed of rugged 20 gauge steel
  • Remote capacity of 20W, compatible with MLED LED remote lamps
  • Extended run time (up to 8 hours without remotes)
  • Meets City of New York Emergency Code requirements
SPECIFICATIONS

Illumination: Two top mounted, fully adjustable, high intensity

lamp heads with high performance, chrome plated,

metallized reflector and plastic lens

Housing: Rugged 20 gauge steel with powder coated finish

Input: 120/277VAC Dual primary, 60Hz

Battery: Maintenance-free sealed lead calcium battery

Operating Temp: 20°C to 50°C (68°F to 122°F)

Run Time: 90 minute emergency run time, 24 hour recharge time

Electrical: Low voltage disconnect eliminates deep discharge

Mounting: Shelf mount or universal mounting pattern provided

for wall mount; knockouts for top or side conduit entry

Finishes: Black or White

Certfications: UL 924 Listed for Damp Locations, Meets NFPA 101

Life Safety Code, NEC, OSHA

Warranty: Any component that fails due to a manufacturing

defect is guaranteed for five years with a separate

two year prorated warranty on the battery. The

warranty does not cover physical damage, abuse or

instances of uncontrollable natural forces. See the full

Exitronix warranty document for detailed information

and product registration instructions.

(Terms and Conditions apply)


RS2 Series 27W LED Steel Emergency Lighting Unit

IES Files


Remote Lamp Heads

MLED1-B
Single Remote Head, 1.5W LED, Indoor, Black
MLED1-B-WP
Outdoor Rated, Single Remote Head, Black Finish
MLED1-G-WP
Outdoor Rated, Single Remote Head, Gray Finish
MLED1-W
Single Remote Head, 1.5W LED, Indoor, White
MLED2-B
Double Remote Head, 1.5W Per LED Head, Indoor, Black
MLED2-B-WP
Outdoor Rated, Double Remote Head, Black Finish
MLED2-G-WP
Outdoor Rated, Double Remote Head, Gray Finish
MLED2-W
Double Remote Head, 1.5W Per LED Head, Indoor, White

Vandal Resistant Polycarbonate Guards

XG-PS
Back Mount - 19.4” X 12.3” X 9”

Vandal Resistant Wire Guards

WG-S
Back Mount - 16.0" X 14.0" X 7"

Contact us or your sales rep if you need a part number that isn't listed here.

RS2-6-27-BL
RS2-6-27-WH

Enter your zip code to find a representative in your area.


exitronix trace lite specialty led growlite
Equity Line


27W LED Steel Emergency Lighting Unit

The Exitronix RS2 Series combines LED performance and dependability with a rugged 20 gauge steel enclosure. The corrosion-resistant, economical emergency unit features fully-adjustable LED lamp heads and easy installation.

cULus Listed Damp Locations Warranty

Need more information?

We are happy to answer any questions you have about the RS2 Series 27W LED Steel Emergency Lighting Unit.

Spec Sheet Request More Info

Configure your RS2 Series 27W LED Steel Emergency Lighting Unit

Series
Battery
Wattage
Finish

Configure your RS2 Series 27W LED Steel Emergency Lighting Unit

Series
Battery
Wattage
Finish

Features & Benefits

  • High impact, injection molded, thermoplastic LED lamp heads
  • 1.5W (12 LEDs x .125 watt) per lamp head
  • Enclosure constructed of rugged 20 gauge steel
  • Remote capacity of 20W, compatible with MLED LED remote lamps
  • Extended run time (up to 8 hours without remotes)
  • Meets City of New York Emergency Code requirements
SPECIFICATIONS

Illumination: Two top mounted, fully adjustable, high intensity

lamp heads with high performance, chrome plated,

metallized reflector and plastic lens

Housing: Rugged 20 gauge steel with powder coated finish

Input: 120/277VAC Dual primary, 60Hz

Battery: Maintenance-free sealed lead calcium battery

Operating Temp: 20°C to 50°C (68°F to 122°F)

Run Time: 90 minute emergency run time, 24 hour recharge time

Electrical: Low voltage disconnect eliminates deep discharge

Mounting: Shelf mount or universal mounting pattern provided

for wall mount; knockouts for top or side conduit entry

Finishes: Black or White

Certfications: UL 924 Listed for Damp Locations, Meets NFPA 101

Life Safety Code, NEC, OSHA

Warranty: Any component that fails due to a manufacturing

defect is guaranteed for five years with a separate

two year prorated warranty on the battery. The

warranty does not cover physical damage, abuse or

instances of uncontrollable natural forces. See the full

Exitronix warranty document for detailed information

and product registration instructions.

(Terms and Conditions apply)

RS2 Series 27W LED Steel Emergency Lighting Unit
RS2 Series 27W LED Steel Emergency Lighting Unit

Remote Lamp Heads

MLED1-B
Single Remote Head, 1.5W LED, Indoor, Black

MLED1-B-WP
Outdoor Rated, Single Remote Head, Black Finish

MLED1-G-WP
Outdoor Rated, Single Remote Head, Gray Finish

MLED1-W
Single Remote Head, 1.5W LED, Indoor, White

MLED2-B
Double Remote Head, 1.5W Per LED Head, Indoor, Black

MLED2-B-WP
Outdoor Rated, Double Remote Head, Black Finish

MLED2-G-WP
Outdoor Rated, Double Remote Head, Gray Finish

MLED2-W
Double Remote Head, 1.5W Per LED Head, Indoor, White

Vandal Resistant Polycarbonate Guards

XG-PS
Back Mount - 19.4” X 12.3” X 9”

Vandal Resistant Wire Guards

WG-S
Back Mount - 16.0" X 14.0" X 7"


Contact us or your sales rep if you need a part number that isn't listed here.

RS2-6-27-BL
RS2-6-27-WH

Enter your zip code to find a representative in your area.


We Have More ItemsYou may also like