LBD Series Constant Power Emergency LED Driver

The Exitronix LED Backup Driver (LBD Series) is specifically designed to provide emergency lighting of LED fixtures with the loss of power. The unit's low-profile configuration makes the series suitable for most pre-installation and on-site applications

Configure your LBD Series Constant Power Emergency LED Driver

Series
Output Power
Battery Chemistry
Output Configuration
Connection Type

Select options above to configure your item.

For options and configurations that don't generate a SKU, contact us or your sales rep.

Spec Sheet Contact Us
  • Provides constant power output to the load during emergency mode operation
  • Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD
  • Universal 120-277VAC, 50/60Hz input
  • Charge/power "ON" LED indicator light and push-to-test switch for mandated code compliance testing
  • Long-life, maintenance-free, rechargeable NiCad battery
  • Output short/overcurrent protection: electronic limiting, with normal operation resuming upon removal of fault
  • 90 Minute minimum emergency operating time over full temperature range (other run times available upon request)
  • Output classification: Class 2 Compliant
  • Surge protection: Per C62.41 (TVS)
  • Input overcurrent protection: fusible link
  • From 800 to 2400 lumen output
  • Output Voltage: 20VDC to 50VDC
  • 24 Hour maximum battery recharge time
  • LED illuminated and remote mounted test switch
  • Injection-molded, engineering grade, 5VA flame-retardant, high-impact resistant thermoplastic in a black finish
  • Suitable for installation on top of a fixture
  • Can be remote mounted (up to 50')
  • Suitable for Field Installation
  • Suitable for Damp Locations 0°C - 50°C (32°F to 122°F)
  • UL Listed
  • 5 Year warranty (Terms and Conditions apply)
Contact us or your sales rep if you need a SKU that isn't listed here.

LBD-10-NC-CW-C
LBD-13-NC-CW-C
LBD-17-NC-CW-C
LBD-5-NC-CW-C
LBD-7-NC-CW-C

We Have More ItemsYou may also like