LBD Series Constant Power Emergency LED Driver

Provides constant power output to the load during emergency mode operation
Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD
Universal 120-277VAC, 50/60Hz input
Charge/power "ON" LED indicator light and push-to-test switch for mandated code compliance testing
Long-life, maintenance-free, rechargeable NiCad battery
Output short/overcurrent protection: electronic limiting, with normal operation resuming upon removal of fault
Output classification: Class 2 Compliant
Surge protection: Per C62.41 (TVS)
Input overcurrent protection: fusible link
From 800 to 2400 lumen output
Output Voltage 20-50VDC, 50-110VDC, and 100-220VDC (2.0A maximum, 50-110VDC and 100-220VDC only available in 17W)
24 Hour maximum battery recharge time
LED illuminated and remote mounted test switch
Injection-molded, engineering grade, 5VA flame-retardant, high-impact resistant thermoplastic in a black finish
Suitable for installation on top of a fixture
Can be remote mounted (up to 50')
Suitable for Field Installation
Suitable for Damp Locations 0°C - 50°C (32°F to 122°F)
UL Listed
5 Year warranty (Terms and Conditions apply)

Constant Power Emergency LED Driver Spec Sheet

Contact us or your sales rep if you need a part number that isn't listed here.

LBD-5-NC-CW-C
LBD-7-NC-CW-C
LBD-10-NC-CW-C
LBD-13-NC-CW-C
LBD-17-HV-NC-CW-C
LBD-17-MV-NC-CW-C
LBD-17-NC-CW-C

Features

Provides constant power output to the load during emergency mode operation
Can be operated as NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD
Universal 120-277VAC, 50/60Hz input
Charge/power "ON" LED indicator light and push-to-test switch for mandated code compliance testing
Long-life, maintenance-free, rechargeable NiCad battery
Output short/overcurrent protection: electronic limiting, with normal operation resuming upon removal of fault
Output classification: Class 2 Compliant
Surge protection: Per C62.41 (TVS)
Input overcurrent protection: fusible link
From 800 to 2400 lumen output
Output Voltage 20-50VDC, 50-110VDC, and 100-220VDC (2.0A maximum, 50-110VDC and 100-220VDC only available in 17W)
24 Hour maximum battery recharge time
LED illuminated and remote mounted test switch
Injection-molded, engineering grade, 5VA flame-retardant, high-impact resistant thermoplastic in a black finish
Suitable for installation on top of a fixture
Can be remote mounted (up to 50')
Suitable for Field Installation
Suitable for Damp Locations 0°C - 50°C (32°F to 122°F)
UL Listed
5 Year warranty (Terms and Conditions apply)