Construction

• Galvanized steel enclosure with 2’ conduits on both ends
• Low profile compact design– only 1.2” thick allows for installation in many applications
• Remote Charge/Power “ON” LED illuminated push to test switch button for mandated code compliance test provides manual verification of the transfer circuit and LED fixtures

Installation

• Suitable for top or in remote installation of an LED fixture
• The test button is easy to locate and provides manual verification of the transfer circuit and emergency lamps
• Can be remote mounted up to 20’ (the remote distance cannot exceed ½ the distance from the driver to the LED load specified by the AC driver manufacturer)
• Remote charge/test button provides manual verification of the transfer circuit and emergency load

Electrical

• Universal 120-277VAC, 50/60Hz
• Long-life, Maintenance-free LiFePO4 battery
• Provides a minimum of 90min of emergency operating time within operating temperatures. 24-hour maximum battery recharge time as per UL 924
• Charge/Power “ON” LED indicator light/ push to test switch for mandated code compliance test is included
• Output short/overcurrent protection: Electronic limiting, with normal operation resuming upon removal of fault
• Surge protection as per C62.41 (TVS)
• Input overcurrent protection: Fusible link

Testing & Compliance

• UL Listed for Damp Locations; IC rated
• Meets UL 924 requirements
• CEC Title 20 compliant
• Suitable for field installation
• Class 2 compliant output classification
• Operating temperatures: 10°C to 55°C (50°F to 131°F)

Performance

• Works with or without an AC driver to convert new or existing LED fixtures into emergency lighting
• Provides constant power output to the load during emergency mode operation
• Designed to operate NORMALLY-ON, NORMALLY-OFF or SWITCHED LOAD fixtures
• 5W to 13W systems with 20-50V output voltage

Warranty

• 5 Year warranty