pic1 pic2 pic3
large view image


LWW RGB Series LED Wall Wash, Wet Location, Color Changing

The LWW RGB is an energy-efficient wall wash fixture ideal for backlighting, up lighting and wall wash applications where dramatic lighting effects are desired. The LWW RGB combines vivid color LEDs in an energy-efficient design to create unique accent lighting capable of 16,000 color variations. The housing is constructed of aluminum and is completely sealed for outdoor use.

cULus Listed IP65 Rated for protection from low pressure water jets from any direction Warranty

Features

  • Red, green and blue LEDs mix to create up to 16,000 color variations
  • High power LEDs project light up to 65’
  • Silver powder coat paint
  • Standard 5’ 120V line cord with plug included
  • Rated for indoor and outdoor use
  • Built-in pre-programmed effects may be programmed by user with a DMX controller
  • Pre-installed 3-pin 1’ signal cable for end-to-end connection

Warranty

  • 3 year warranty
Technical Specifications
  • 3-pin signal connector, standard power cord, color changing, linear LED product
  • Voltage: 120VAC
  • Frequency: 60Hz
  • Weight: 13.48 lbs
  • IP rating: IP65
  • Dimensions: 47.25” long, 2.18” wide, 5” high (including mounting feet)
  • Operating distance: Up to 30 units can be controlled with one DMX address
  • Meets or exceeds UL standards
Product Specifications

LED specs:

  • Rated life: 50,000 hours
  • 36 LEDs mounted per 4’ section
  • Max 64.8W power consumption
  • Operating current: 0.54A

Construction:

  • 4’ linear product (47.25”)
  • Extruded aluminum housing, clear tempered glass lens
  • Silver powder coat painted
  • Fully sealed and gasketed unit for outdoor use
  • Each unit has a five (5) foot grounded line cord
  • Each unit has an input control signal cord and an output control signal cord
  • Integrated driver

Optic: 25° beam, 65’ light projection

Installation: Mounting brackets allow for the user to adjust the angle of the fixture based on project needs and allows for installation on various mounting surfaces

Operating temperature: -20°C- 40°C (-4°F - 104°F)

Control:

  • Fully DMX compatible, enabling direct control from any DMX control system. Uses only 3 channels of DMX to enable programming of linear color changing, step based scenes as desired
  • The unit can be operated standalone with built in pre-programmed effects using the waterproof push button and external LED display located on the back of the fixture. Fixtures will automatically sync with each other during test mode
  • Unit has a control signal lead in and out that allows one fixture to be connected to another and controlled together with up to 30 fixtures per run.(Control signal cable only, each fixture needs power individually)

LWW RGB Series LED Wall Wash, Wet Location, Color Changing

IES Files


Accessories

LWW-DATA-10
10' Jumper Cable with 3 Pin DMX XLR
LWW-DATA-3
3' Jumper Cable with (2) 3 Pin DMX XLR Connectors
LWW-DATA-3-PIN-CONNECTOR
Adapter Cable Pin; 3 DMX to 3 Pin DMX XLR
LWW-DATA-40
40' Jumper Cable with 3 Pin DMX XLR
LWW-POWER-10
10' Power Extension Cable

Controllers

POWER4M
Power Adapter for STICK-KE2, 6VDC, 0.65A
STICK-KE2
DMX Controller Keypad, 1024 Channels

Contact us or your sales rep if you need a part number that isn't listed here.


Enter your zip code to find a representative in your area.


exitronix trace lite specialty led growlite


The LWW RGB is an energy-efficient wall wash fixture ideal for backlighting, up lighting and wall wash applications where dramatic lighting effects are desired. The LWW RGB combines vivid color LEDs in an energy-efficient design to create unique accent lighting capable of 16,000 color variations. The housing is constructed of aluminum and is completely sealed for outdoor use.

cULus Listed IP65 Rated for protection from low pressure water jets from any direction Warranty

Need more information?

We are happy to answer any questions you have about the LWW RGB Series LED Wall Wash, Wet Location, Color Changing.

Spec Sheet Request More Info

Configure your LWW RGB Series LED Wall Wash, Wet Location, Color Changing

Part Number

Configure your LWW RGB Series LED Wall Wash, Wet Location, Color Changing

Part Number

Features

  • Red, green and blue LEDs mix to create up to 16,000 color variations
  • High power LEDs project light up to 65’
  • Silver powder coat paint
  • Standard 5’ 120V line cord with plug included
  • Rated for indoor and outdoor use
  • Built-in pre-programmed effects may be programmed by user with a DMX controller
  • Pre-installed 3-pin 1’ signal cable for end-to-end connection

Warranty

  • 3 year warranty
Technical Specifications
  • 3-pin signal connector, standard power cord, color changing, linear LED product
  • Voltage: 120VAC
  • Frequency: 60Hz
  • Weight: 13.48 lbs
  • IP rating: IP65
  • Dimensions: 47.25” long, 2.18” wide, 5” high (including mounting feet)
  • Operating distance: Up to 30 units can be controlled with one DMX address
  • Meets or exceeds UL standards
Product Specifications

LED specs:

  • Rated life: 50,000 hours
  • 36 LEDs mounted per 4’ section
  • Max 64.8W power consumption
  • Operating current: 0.54A

Construction:

  • 4’ linear product (47.25”)
  • Extruded aluminum housing, clear tempered glass lens
  • Silver powder coat painted
  • Fully sealed and gasketed unit for outdoor use
  • Each unit has a five (5) foot grounded line cord
  • Each unit has an input control signal cord and an output control signal cord
  • Integrated driver

Optic: 25° beam, 65’ light projection

Installation: Mounting brackets allow for the user to adjust the angle of the fixture based on project needs and allows for installation on various mounting surfaces

Operating temperature: -20°C- 40°C (-4°F - 104°F)

Control:

  • Fully DMX compatible, enabling direct control from any DMX control system. Uses only 3 channels of DMX to enable programming of linear color changing, step based scenes as desired
  • The unit can be operated standalone with built in pre-programmed effects using the waterproof push button and external LED display located on the back of the fixture. Fixtures will automatically sync with each other during test mode
  • Unit has a control signal lead in and out that allows one fixture to be connected to another and controlled together with up to 30 fixtures per run.(Control signal cable only, each fixture needs power individually)

Accessories

LWW-DATA-10
10' Jumper Cable with 3 Pin DMX XLR

LWW-DATA-3
3' Jumper Cable with (2) 3 Pin DMX XLR Connectors

LWW-DATA-3-PIN-CONNECTOR
Adapter Cable Pin; 3 DMX to 3 Pin DMX XLR

LWW-DATA-40
40' Jumper Cable with 3 Pin DMX XLR

LWW-POWER-10
10' Power Extension Cable

Controllers

POWER4M
Power Adapter for STICK-KE2, 6VDC, 0.65A

STICK-KE2
DMX Controller Keypad, 1024 Channels


Enter your zip code to find a representative in your area.


We Have More ItemsYou may also like