RQHL Series

Round LED Highbay

RQHL Series Round LED Highbay

Equity Line

While Supplies Last
Equity Line
RQHL Series Round LED Highbay is from our Equity Line of products.

More Equity Line Products
While Supplies Last


RQHL Series Round LED Highbay

The RQHL Series is a cost-effective round highbay solution offered in multiple lumen packages. Delivering up to 30,000 lumens, the RQHL is optimized for project flexibility in retail, industrial, commercial, manufacturing, warehousing, gymnasium and other large interior spaces with mounting heights up to 50’. The RQHL features an IK10 rated lensand is supplied with a standard ¾” mounting hook, 6’ cord and safety cord. This series can be pendant, hook or surface mounted and is available with optional battery backup, motion sensor and a variety of other accessories. This highbay is suitable for ambient temperatures up to 50°C (122°F).

UL Certified DLC Qualified California Title 24 cULus Listed for Wet Locations IP65 Rated for protection from low pressure water jets from any direction IK10 Rated for Impact Protection Warranty
RQHL Series Round LED Highbay is AVAILABLE WHILE SUPPLIES LAST


Construction

  • Die-cast aluminum housing with heat-dissipating fins in a black powder coated finish
  • Sealed design for use in Wet Locations
  • Isolated top driver compartment optimizes thermal dissipation
  • ¾ Hook, 6’ whip and security cable included

Optics/LEDs

  • UV-stabilized polycarbonate lens - IK10 impact tested
  • Diffused 160° distribution
  • Multiple lumen packages from 9,100 to 30,000 lumens for job flexibility
  • Available in 4000K and 5000K CCT
  • Efficacy up to 140 LPW
  • L70 > 100,000 hours
  • Rated for over 50,000 hours at 50°C (122°F)
  • CRI ≥80

Installation

  • ¾” NPT threaded hook included
  • Can be conduit pendant (3/4”) mounted, (conduit by supplied other)
  • Optional yoke mount bracket for surface mount installation
  • Integral battery backup - field or factory installed
  • Includes 6’ whip/cord standard

Electrical

  • Class 2 power supply, universal 120-277VAC, 50/60Hz
  • Power Factor > 0.90
  • Built in driver surge protection L/N-PE: 6kV, L-N: 4kV (67W = L- N: 2KV)

Options

  • Factory-installed battery backup (120-277VAC) 8W, delivers 900 lumens for over 90 minutes of emergency-powered illumination (Option: BB)
  • Integral motion sensor (120-277VAC) located in the center of the lens (Option: SC). Sensor allows for two or three step/level dimming and has optional daylight harvesting capabilities. Settings can be adjusted with optional remote control accessory. See sensor details for default sensor settings

Accessories

  • External battery backup (120/277VAC) accessory blends in seamlessly with the design of the round highbay, delivers 900 lumens for over 90 minutes of emergency-powered illumination. Rated for ambient temperatures of 10°C to 40°C (50°F to 104°F)
  • Remote for occupancy sensors option (TL-MSSW-REMOTE)
  • Yoke mount bracket for surface mount applications (RQHL-YK-BL, RQHLYK2- BL)
  • Multiple line cords (indoor rated) for field installation (LC6T, LC15, LC15T)
  • Remote for occupancy sensors option (TL-MSSW-REMOTE)
  • Field-installed In-line 10kVA surge protector for 120/277VAC, 320V, 420J (20300032)

Testing & Compliance

  • cULus listed for Wet Locations
  • IP65 Rated
  • IK10 Rated lens
  • DesignLights Consortium® (DLC) Qualified
  • Meets state of California Title 24 requirement for dimming and control of light fixtures
  • Operating temperatures: -40°C to 50°C (-40°F to 122°F)

Warranty

  • Five Year Warranty (Terms and Conditions Apply)

Accessories

20300032
Field-installed In-line 10kVA Surge Protector for 120/277VAC, 320V, 420J

Battery Backup Kits

RQHL-BB-A-BL
8W Battery Backup Kit + Rod, Black Finish (for 67W & 140W)
RQHL-BB-B-BL
8W Battery Backup Kit + Rod, Black Finish (for 97W & 190W)

Line Cords

LC15
15' Line Cord
LC15T
Line Cord, 15', Indoor, SJT, 18 AWG, 3 Conductor, 300V, L7-20P Plug
LC6T
Line Cord, 6', Indoor, SJT, 18 AWG, 3 Conductor, 300V, L7-20P Plug

LiteLogic Accessories

TL-MSSW-REMOTE
Remote Control for Motion Sensor (Non-Bluetooth Sensors Only)

Mounting

RQHL-YK-BL
Yoke Mount Bracket (67W, 97W, 140W, 190W), Black Finish
RQHL-YK2-BL
Yoke Mount Bracket for RQHL-215W, Black Finish

Contact us or your sales rep if you need a part number that isn't listed here.

RQHL-67-VS-4K-BL
RQHL-97-VS-4K-BL
RQHL-97-VS-5K-BL
RQHL-140-VS-5K-BL
RQHL-190-VS-5K-BL
RQHL-215-VS-4K-BL

Energy Rebates

Qualified products may be eligible for utility rebates.


Enter your zip code to find a representative in your area.


exitronix trace lite specialty led growlite
Equity Line

While Supplies Last


Round LED Highbay

The RQHL Series is a cost-effective round highbay solution offered in multiple lumen packages. Delivering up to 30,000 lumens, the RQHL is optimized for project flexibility in retail, industrial, commercial, manufacturing, warehousing, gymnasium and other large interior spaces with mounting heights up to 50’. The RQHL features an IK10 rated lensand is supplied with a standard ¾” mounting hook, 6’ cord and safety cord. This series can be pendant, hook or surface mounted and is available with optional battery backup, motion sensor and a variety of other accessories. This highbay is suitable for ambient temperatures up to 50°C (122°F).

UL Certified DLC Qualified California Title 24 cULus Listed for Wet Locations IP65 Rated for protection from low pressure water jets from any direction IK10 Rated for Impact Protection Warranty
RQHL Series Round LED Highbay is AVAILABLE WHILE SUPPLIES LAST


Need more information?

We are happy to answer any questions you have about the RQHL Series Round LED Highbay.

Spec Sheet Request More Info Rebate Finder

Configure your RQHL Series Round LED Highbay

Series
Wattage
Input Voltage
CCT
Finish
Options

Configure your RQHL Series Round LED Highbay

Series
Wattage
Input Voltage
CCT
Finish
Options

Construction

  • Die-cast aluminum housing with heat-dissipating fins in a black powder coated finish
  • Sealed design for use in Wet Locations
  • Isolated top driver compartment optimizes thermal dissipation
  • ¾ Hook, 6’ whip and security cable included

Optics/LEDs

  • UV-stabilized polycarbonate lens - IK10 impact tested
  • Diffused 160° distribution
  • Multiple lumen packages from 9,100 to 30,000 lumens for job flexibility
  • Available in 4000K and 5000K CCT
  • Efficacy up to 140 LPW
  • L70 > 100,000 hours
  • Rated for over 50,000 hours at 50°C (122°F)
  • CRI ≥80

Installation

  • ¾” NPT threaded hook included
  • Can be conduit pendant (3/4”) mounted, (conduit by supplied other)
  • Optional yoke mount bracket for surface mount installation
  • Integral battery backup - field or factory installed
  • Includes 6’ whip/cord standard

Electrical

  • Class 2 power supply, universal 120-277VAC, 50/60Hz
  • Power Factor > 0.90
  • Built in driver surge protection L/N-PE: 6kV, L-N: 4kV (67W = L- N: 2KV)

Options

  • Factory-installed battery backup (120-277VAC) 8W, delivers 900 lumens for over 90 minutes of emergency-powered illumination (Option: BB)
  • Integral motion sensor (120-277VAC) located in the center of the lens (Option: SC). Sensor allows for two or three step/level dimming and has optional daylight harvesting capabilities. Settings can be adjusted with optional remote control accessory. See sensor details for default sensor settings

Accessories

  • External battery backup (120/277VAC) accessory blends in seamlessly with the design of the round highbay, delivers 900 lumens for over 90 minutes of emergency-powered illumination. Rated for ambient temperatures of 10°C to 40°C (50°F to 104°F)
  • Remote for occupancy sensors option (TL-MSSW-REMOTE)
  • Yoke mount bracket for surface mount applications (RQHL-YK-BL, RQHLYK2- BL)
  • Multiple line cords (indoor rated) for field installation (LC6T, LC15, LC15T)
  • Remote for occupancy sensors option (TL-MSSW-REMOTE)
  • Field-installed In-line 10kVA surge protector for 120/277VAC, 320V, 420J (20300032)

Testing & Compliance

  • cULus listed for Wet Locations
  • IP65 Rated
  • IK10 Rated lens
  • DesignLights Consortium® (DLC) Qualified
  • Meets state of California Title 24 requirement for dimming and control of light fixtures
  • Operating temperatures: -40°C to 50°C (-40°F to 122°F)

Warranty

  • Five Year Warranty (Terms and Conditions Apply)

Accessories

20300032
Field-installed In-line 10kVA Surge Protector for 120/277VAC, 320V, 420J

Battery Backup Kits

RQHL-BB-A-BL
8W Battery Backup Kit + Rod, Black Finish (for 67W & 140W)

RQHL-BB-B-BL
8W Battery Backup Kit + Rod, Black Finish (for 97W & 190W)

Line Cords

LC15
15' Line Cord

LC15T
Line Cord, 15', Indoor, SJT, 18 AWG, 3 Conductor, 300V, L7-20P Plug

LC6T
Line Cord, 6', Indoor, SJT, 18 AWG, 3 Conductor, 300V, L7-20P Plug

LiteLogic Accessories

TL-MSSW-REMOTE
Remote Control for Motion Sensor (Non-Bluetooth Sensors Only)

Mounting

RQHL-YK-BL
Yoke Mount Bracket (67W, 97W, 140W, 190W), Black Finish

RQHL-YK2-BL
Yoke Mount Bracket for RQHL-215W, Black Finish


Contact us or your sales rep if you need a part number that isn't listed here.

RQHL-67-VS-4K-BL
RQHL-97-VS-4K-BL
RQHL-97-VS-5K-BL
RQHL-140-VS-5K-BL
RQHL-190-VS-5K-BL
RQHL-215-VS-4K-BL

Enter your zip code to find a representative in your area.


We Have More ItemsYou may also like